Mahindra 2816 tractor is a compact utility tractor produced by Mitsubishi between 2008 and 2010. The Mahindra 2816 engine is a 3-cylinder Mitsubishi engine. The Mahindra 2816, which comes with two different transmission options, is one of the most popular tractors in the 16 series.
The Mahindra 2816 was designed for high performance and dependability in harsh environments. Its compact design makes it simple to operate and maneuver in small spaces. It also has a variety of attachments that can be used for a variety of applications.Mahindra 2816 Review
Performance
Specifications
Price
The Mahindra 2816 has been ergonomically designed for ease of use by its operator, with comfortable seatand controls that are easy to reach from any position on the machine. The operator’s seat also has an optional adjustable backrest and arm rests on both sides for added comfort while driving this machine throughout the day.
Mahindra 2816 Specs
| Manufacturer | Mitsubishi |
| Model | Mahindra 2816 |
| Series | 16 series |
| Type | Compact utility tractor |
| Years Made | 2008-2010 |
Engine
| Engine Manufacturer | Mitsubishi |
| No of Cylinder | 3 |
| Type | Diesel |
| Lubrication | Forced circulation by trochoid pump |
| Fuel System | Swirl chamber |
| Fuel Injection Pump | BOSCH M Plunger In Line NIPPONDENSO |
| Fuel Injectors | Throttle Type, NIPPONDENS |
| Air System | Dry Type |
| Injection Pump | In-Line type |
| Injection Pump Timing | 17°BTDC |
| Air Cleaner | Dry-type |
| Cooling System | Centrifugal pump with thermostat |
| Starter | Electric |
| Compression Ratio | 22 : 1 |
| Firing Order | 1-3-2 |
| Max. Working Speed | 2600 RPM |
| Horsepower | 21 kW 28 HP |
| Displacement | 80.4 cu. in. 1318 cc |
| Bore and Stroke | 3.07×3.62 in. 78×92 mm |
Transmission
| Gear Drive | Synchromesh on gear shift with three ranges of selective sliding gear |
| Gear Selection | 9 forward 3 reverse |
| Shifting | Actuated by two shift levers on the LH fender |
| Clutch | Dry, Dual Disc, 215 mm – 8.46 in. |
| Operation | Mechanical |
| Steering | Hydrostatic |
Hitch System
| Type | Three point, Category I |
| Type Control | Position control |
| Type Valve | Three positions, Lift, hold and lower |
| Lifting Capacity | 1653 lbs 750 kg |
| Type of Cylinder | Single acting type |
Power Take-Off (PTO)
The Mahindra 2816 has a standard and an additional mid PTO.
Rear PTO
| Type | Live PTO |
| Location | At the rear of transmission |
| Rotation | Clockwise from rear of tractor |
| Shaft Size | 34.9mm(1.375 Inch) Diameter, 6 Splines |
| PTO Speed | Dual Speed 540 RPM at 2376 Engine RPM |
Mid PTO
| Type | Live PTO |
| Location | At the bottom of transmission |
| Rotation | Clockwise from rear of tractor |
| Shaft Size | 25.4 mm (1 Inch) Diameter, 15 Splines |
| PTO Speed | Dual Speed 2000 RPM at 2632 Engine RPM |
Drawbar
| Type | Fixed type |
| Distance from Hitch Hole to the END of PTO Shaft | 85 mm 3.346 inch |
| Maximum Vertical Load on Drawbar | 136 kg 300 lbs |
Hydraulic System
| Type | Front mounted, engine driven, pressure loading gear type |
| Auxiliary Connector | Front Hydraulic Block |
| Connector Size | 9.5 mm 0.4 in. |
| Remote Hydraulic Control Valve (Optional) | One Double acting Type Auxiliary Valve Available |
| Pump for Three Point Hitch Capacity | 7.8 GPM 29.6 LPM |
| Pump for Power Steering Capacity | 3.5 GPM 13.4 LPM |
| Hydraulic Pressure | 2133 Psi 147.1 Bar |
Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Wheelbase | 65 in. | 165 cm |
| O/A Length | 115 in. | 292 cm |
| O/A Height | 84 in. | 214 cm |
| O/A Width | 54 in. | 138 cm |
| Turning Radius | 95 in. | 240 cm |
Tire Size
| Standard Front – Ag | 7-16 |
| Standard Rear – Ag | 11.2-24 |
| Industrial Front | 27×8.5-15 |
| Industrial Rear | 15×19.5 |
Weight
| Weight | Imperial | Metric |
|---|---|---|
| Operating Weight | 2315 lbs | 1050 kg |
FAQ of Mahindra 2816 Tractor
The Mahindra 2816 has 28 horsepower.
Mahindra 2816 weighs 2315 pounds.
The Mahindra 2816 has the lifting capacity of 1,653 lbs.
The oil capacity of the Mahindra 2816 tractor is 8 qts.
